sales-arm@MAPLELEAF-INFO.COM (foR ARM AND ALTIUM BUSINESS)
ULINK2 Debug and Serial Wire Trace
Flash programming + run-control
Memory + breakpoint (access while running)
Serial wire trace capturing up to 1 Mbit/sec (UART mode)
10 MHz JTAG/SW clock speed
Specifications
The ULINK2 debug unit connects your PC's USB port to your target system (via a JTAG, Cortex Debug, or OCDS connector). It allows you to program and debug your applications on target hardware.
ULINK2, together with Arm Keil MDK, provides excellent debug capabilities for Cortex-M devices. You can control the processor, set breakpoints, and read/write memory contents, all while the processor is running at full speed.
Connectivity: USB 2.0 high-speed connection
Wide Target Voltage Range: 2.7V-5.5V
Power: USB powered (no power supply required)
Target Connectors: 10-pin (0.05") - Cortex Debug Connector 20-pin (0.10") - Arm Standard JTAG Connector
Device Support: ULINK2 connects to a wide variety of processor targets, including Arm7, Arm9, all Cortex-M, 8051, and C166 devices.
Debug Interface Support: JTAG support for Arm7, Arm9, 8051, C166, and all Cortex-M processors. Serial Wire Debug (SWD) support for all Cortex-M processors. Serial Wire Viewer (SWV) support for all Cortex-M processors.
Run/stop Debugging Features: Download programs to your target hardware. Examine memory and registers. Single-step through programs and insert multiple breakpoints. Run programs in real-time. Program Flash memory.
Features:
A ULINK debug adapter allows you to debug, trace and analyze embedded programs running on the target hardware. All ULINK adapters enable you to:
Download programs to your target hardware.
Examine memory and registers.
Single-step through programs and insert multiple breakpoints.
Run programs in real-time.
Program Flash memory.
Connect to a target via JTAG or Serial Wire Debug (SWD).
Debug Arm Cortex-M devices on-the-fly.
Examine trace information from Armv7-M and Armv8-M devices.